Tests and tags are names given during the safety verification of portable electrical products.

First, it consists of two parts. First, the device is visually inspected for damage and then electrically tested with a handheld device tester.

After the test, the purpose of the test, the date of the test and the following test program are testing and tagged to confirm the completion of the test.

The main reason for the test and the label is to ensure that personnel safety touches the device, minimizing the risk of electrical hazards.

Regulations and guidelines are defined based on Australian standards AS/NZS 3760 for tagging and testing industry for the electrical safety of the devices. Establish recommendations for problems such as testing and label spacing, define who can test and tag, and define general guidelines.

Who should test and tag?

Usually, in construction industries, you must test and tag your appliance every three months. This is due to the poor nature of the industry, which can be damaged by the high speed of the equipment. The test and tag colours vary according to periods during the year, so certain times of the year effectively match specific test label colours. test and tag prices Melbournealso vary according to colour and dimensions.

Except in these industries, tests and tags are not legislative requirements for other workplaces. But employers must pay attention to the safety of their employees. In other words, if someone gets hurt without trying an insecure device, they can take responsibility. Because of this, it is the employer’s responsibility to test all portable electrical products.

Test and tag using electrical equipment

You do not need to be an electrician for testing and tagging, but you need to follow the regulations and guidelines defined according to the AS/NZS 3760 Australian standard. Anyone can be considered competent enough for testing and tagged in Australia. This is achieved by performing a testing and tagging process that acquires knowledge and skills in the use of PAT testers.

QLD residents who want to test and provide labels as a service must meet the additional requirements for a limited electrical contractor license.

What equipment type do you test and tag?

Any device, comprising a removable plug and not low voltage can be used for this purpose. This includes extension cables, cable sets and portable RCDs.

In general, devices can be classified as:

Class I: grounded appliances, such as teapots, irons and toasts.

Class II double isolation mechanism:

As a rule, it is identified by the word ‘double insulation’, that is, most hair dryers and electric drills.

The new equipment does not require inspection, tagging and visual inspection.

How often do I need to test and tag my appliance?

According to Australian standards specific tests and label frequencies, depending on the type of environment in which the device resides. In some cases, the workplace may vary depending on the risk assessment. In general, the test and tag prices depend on the customer’s requirements.